Main feature
- Built-in four LED light sources of 420nm, 470nm, 620nm and 700nm, long life and high precision;
- Using spectrophotometry, built-in high and low chemical oxygen demand (COD), ammonia nitrogen, total phosphorus four test items;
- Support single-point and multi-point calibration, allowing users to edit calibration curves;
- Supports two measurement methods: absorbance and concentration;
- Support two reading modes: Smart-Read function (smart judging end point), Cont-Read function (continuous measurement);
- Each test item can store 200 sets of measurement results, conform to the GLP specification, and support data review, deletion and printing;
- Support USB communication, support connection to PC for data acquisition;
- Support battery power and USB power supply, support power management function, can be set to automatically turn off the light source and automatically shut down;
- IP65 protection grade, good waterproof and dustproof performance;
- Support firmware upgrade, support for factory reset, allow for function expansion and application expansion.
Technical Parameters
model |
DGB-401 |
|
wavelength |
420nm; 470nm; 620nm; 700nm |
|
Measuring range |
Ammonia nitrogen |
(0.000 ~ 4.000) mg / L, can be extended to (0.000 ~ 300.00) mg / L |
Low concentration COD |
(0.0~150.0)mg/L |
|
High concentration COD |
(150~1500)mg/L |
|
Total phosphorus |
(0.000~1.000)mg/L, can be extended to (0.000~25.00)mg/L |
|
Basic error |
Ammonia nitrogen |
±10% |
Low concentration COD |
±8% |
|
High concentration COD |
±8% |
|
Total phosphorus |
±10% |
|
Repeatability |
Ammonia nitrogen |
±3% |
Low concentration COD |
±3% |
|
High concentration COD |
±3% |
|
Total phosphorus |
±3% |
|
stability |
Ammonia nitrogen |
The change of ammonia nitrogen concentration within 20min should be less than 0.200mg/L |
Low concentration COD |
The change of COD value within 20min should be less than 6mg/L |
|
High concentration COD |
The change of COD value within 20min should be less than 6mg/L |
|
Total phosphorus |
The change of total phosphorus concentration within 20min should be less than 0.050mg/L |