Overview
PT-D445-1007 Automatic cleanser for viscometer is used for cleaning and drying capillary viscometers, such as Ubbelohde, Cannon-Fenske Routine and etc. the experiment’s entire process is auto.
Features
- Vacuum absorbs, feed liquid interval, it can wash the viscometers repeatedly until the viscometers are clean and the machine works fast.
- It is suitable for many kinds of viscometers according to the need and supplying different fittings.
- It can set rinsing time, number of cleaning times, the temperature and time of drying at will.
- According to the dirty degree of the viscometers, it can select one or two kinds of washing liquids to drive out the residue completely.
- Pipeline uses oil-proof rubber tube to connect, which is oil-proof and corrosion-resistant.
- No vapor washing liquid in the washing box and it is safety. The highest temperature is 80°C in the box.
Technical parameters
| Rated voltage |
AC220V±10% 50Hz |
|
Total Consumed power |
< 300W |
|
Vacuum pumping air rate |
≥80L/min |
|
Cleaning numbers |
Six |
|
Bottles of cleaning fluid capacity |
2.5L |
|
Bottles of waste fluid capacity |
2.5L |
|
Ambient requirement |
Temperature: 20~30°C Humidity≤85% |
