Home > >Hazardous chemicals tester

Hazardous chemicals tester

Hazardous chemicals tester 

  • CIT12-10S gas hazardous characteristics tester is suitable for most clean combustible gas and mixture by a number of pure proportional composition of combustible gases, flammable gas detection in air flammable concentration range, in line with GB 19521.3-2004 "combustible gas hazards safety code for inspection dangerous character. "

  •  CIT10-10S aerosol spray enclosed space test instrument is used to assess flammability of the aerosol in a closed or restricted space. It is in line with the United Nations "on the Recommendations on the Transport of Dangerous Goods • Manual of Tests and Criteria" 31.5 enclosed space ignition test and GB / T 21631-2008 "dangerous sprays enclosed space...

  •  CIT09-10S aerosol spray ignition distance test instrument is used to measure the，ignited distance of the aerosol spray .It is suitable for aerosol products with  15cm spraying distance and above

  • CIT08-10S liquid continuous burning tester is used to determine whether the liquid is continuous burning when heated and exposed to flame. It is used for liquid with no crystallization or precipitation of at room temperature under test conditions

  • This tester is used to determine the potential of a liquid substance to increase the burning rate or burning intensity of a combustible substance when it is completely mixed with the combustible substance;

  • CIT05-20S oxidizing solids tester is measuring the potential of the sample which completely mixed with some kind of combustible material to increase burning rate of combustible substances or intensity of combustion, compare the combustion test time and the standard mixture, and then confirm the packing group, suitable for the solid material.

  • CIT04-10S metal corrosion tester is used to determine the causticity of the liquid and the solid which may turn into liquid during transportation

  • CIT02-10S solid burning rate test instrument used to determine the substance propagation combustion capacity for granular, pasty or powdery substances

  • Gas storage tank pressure detector is used for testing the internal pressure of the lighters and firing guns, the instrument has two operating modes: Detection mode and calibration mode.

  •  Weighing leak detection system is a professional instrument used to determine whether the fuel leaks after the carrying lighter drop test, high temperature test, repeat the test gas injection, compatibility tests, burning liquid volumetric displacement test (to be upgraded filling) and other tests.

  • Lighter flame height of the image detector to detect a single batch of five lighters, compatible with many types of lighters can set the relevant parameters according to the characteristics, it is possible to achieve lighter auto sampler, auto fire, auto-complete height of the flame, the flame is extinguished the fire and explosion, splashing fire, flame...

  • Automatic drop test system is an instrument for measuring of anti-drop performance of lighters, firing guns in case of accidental drops, mainly by the cabinet, linear units, intelligent clamping unit, the floor drops and the control system of five parts. The test system has an operation process is simple, high detection efficiency, good explosion,...

  • Lighter continuous burning test instrument capable of simultaneously for 10 lighters continuous operation of the combustion test, the instrument through horizontal and vertical motion stepper motor fine-tuning can be more adaptable lighter.

  • Lighter pressure parameter detector instrument applies to hit straight, ramp-hit lighters. When measuring electric putter in the vertical direction of the reciprocating motion, press the button to make the lighter to ignite the lighter, pull pressure sensors and light barriers, encoders were measured by pressure and displacement lighter button.

  • SBT01-10S tilting box can be used to determine non-cohesive materials (size less than 10mm) angle of repose. Angle automatically read, structure, function, installation and technical requirements meet the provisions of "IMSBC rule", the box is made of steel.

  • SBT04-10S Portuguese tester can be used for fine and relatively coarse particles concentrate or a maximum of 5 mm test, function, installation and technical requirements meet the provisions of similar substance "IMSBC rules" in Appendix 2.