Silver strip corrosion tester for jet fuel

Model No.: PT-D130-1021(1021A)

PT-D130-1021 (1021A)Silver strip corrosion tester for jet fuel is suitable to the standards of ASTM D130 and IP227. It can test the resistance to the copper corrosion of aviation gasoline, jet fuel, motor gasoline, natural gas and other products RVP of which RVP is not higher than 124kPa. It can test corrosion tendency of silver component of jet fuel for aviation turbine engine fuel system.

More details

Inquiry now

Remove this product from my favorite's list.
Add this product to my list of favorites.
Print

Product info

Overview
PT-D130-1021 (1021A)Silver strip corrosion tester for jet fuel is suitable to the standards of ASTM D130 and IP227. It can test the resistance to the copper corrosion of aviation gasoline, jet fuel, motor gasoline, natural gas and other products RVP of which RVP is not higher than 124kPa. It can test corrosion tendency of silver component of jet fuel for aviation turbine engine fuel system.
PT-D130-1021: 4 holes
PT-D130-1021A: 8 holes

Features

The apparatus could be conducted in four-way experiment, two standard experiments, greatly improving test efficiency.
The apparatus is equipped with stainless steel bath, corrosion-resistant.
Using of digital display temperature controller, temperature control and high accuracy.
Simple operation with elegant structure.

Technical parameters

Model	PT-D130-1021	PT-D130-1021A
Rated voltage	AC 220V±10% 50Hz	AC 220V±10% 50Hz
Power	1500W	2800W
Temperature control	Digital display temperature control	Digital display temperature control
Temperature range	Room temperature ~ 100°C	Room temperature ~ 100°C
Temperature accuracy	± 1°C	± 1°C
Temperature sensor	Pt100 (Platinum resistor)	Pt100 (Platinum resistor)
Slot holes	4 holes	8 holes
Mixing method	Mixing motor, 1200r/min
Ambient requirement	temperature 15~30°C Humidity≤85%	temperature 15~30°C Humidity≤85%
package size	56X34X71 cm	56X34X71 cm
gross weight	21.5 KG	21.5 KG