Automatic gasoline oxidation stability tester (Induction Period Method)

Overview
PT-D525-1008A Automatic gasoline oxidation stability tester (Induction Period Method) conforms to ASTM D525 standard. It is used to test the stability of gasoline in finished form only, under accelerated oxidation conditions. (Warning This test method is not intended for determining the stability of gasoline components, particularly those with a high percentage of low boiling unsaturated compounds, as these may cause explosive conditions within the apparatus.

Features 

1. The temperature control adopts human-computer interface of touch screen, easy to use, convenient to observe. The screen shows terminal point after reaching the inflection point. 
2. The instrument adopts advocate complementary type heating, warming fast and reducing the power consumption.
3. The instrument bath adopts stainless steel material, corrosion resisting and antioxidant. The inner of the instrument is equipped with automatic water charging system, keeping the water level.
4. The instrument can detect the leakage of testing bomb and show the result automatically.
5. The instrument adopts imported AJG, high accuracy, good stability, can revise the pressure.

Technical Parameters 
Rated voltage:220V±10%  50HZ 
Main heating power:1000W 
Auxiliary heating power:1500W 
Temperature controlling point:100°C 
Temperature controlling precision:±0.5°C 
Operation mode:Four-strand touch screen type
Sensor:Pt100 (platinum resistor) 
Bath hole:2 holes 
Ambient requirement:Temperature:15~30°C; Humidity≤85%