LB film dual drive film balance

SI-LBM04S dual drive film balance is based on the SI-LBM04 LB film analyzer instrument, does not have the function of pull ing the membrane, other functions consistent with the SI-LBM04 LB film analyzer. Other tank area can be customized.

Main functions and features
1, The operation and data acquisition is controlled by a PC and pre-MCU ,automation and intelligent , minimize operator error;
2, the key components (including sensors) import, test data accurate and repeatable;
3, Based on the entire Chinese WINDOW Windows operating software, user-friendly interface, graphics can be stored in the print data can be secondary treatment;
4, Tank surface area, high sensitivity, small leakage;
5, Can automatically measure the liquid surface tension.
6, Can draw r-A and π-A curve.
7, The film tension can be set into the lower limit according to r-A and π-A curve, slider repeated compression and expansion barrier film.
8, Can be set to a constant tension, pull the slide barrier in the movement of the film in order to maintain constant tension.
9, Thoughtful design to ensure that the instrument can be applied to routine testing environment, and common configuration PC to work online, smooth running, small vibration, low noise
10, Our company has completely independent intellectual property rights for this instrument, guarantee the user repairs, upgrades, service rights, and can customize models according to user needs.

Main Technical Index

Surface tension measurement range: 0mN / m-150mN / m

Resolution: 0.05 mN / m

Detection methods: hanging plate method (WILHELMY TYPE)

Tank mode: LANGMUIR

Tank Material: PTFE material

Tank area: 300mmx200mm
               300mmx100mm
                200mmx80mm
               Other area can be customized tank can be customized dual slot or groove to pull the membrane system

Compression size: 90%

Slip fault: LEAKPROOF or BARRIER

Slip Velocity Obstacle: 0.48-97mm / min

Power supply voltage: AC220 ± 10V

Power frequency: 50Hz

Maximum power consumption: 150W

Working temperature: room temperature, external thermostatic water bath

Humidity: 30% to 85% relative humidity

Customizable dual slot or groove to pull the membrane system