Automatic cleanser for viscometer

PT-D445-1007

PT-D445-1007 Automatic cleanser for viscometer is used for cleaning and drying capillary viscometers, such as Ubbelohde, Cannon-Fenske Routine and etc. the experiment’s entire process is auto.

More details

Product info

Overview
PT-D445-1007 Automatic cleanser for viscometer is used for cleaning and drying capillary viscometers, such as Ubbelohde, Cannon-Fenske Routine and etc. the experiment’s entire process is auto.

Features

  1. Vacuum absorbs, feed liquid interval, it can wash the viscometers repeatedly until the viscometers are clean and the machine works fast.
  2. It is suitable for many kinds of viscometers according to the need and supplying different fittings.
  3. It can set rinsing time, number of cleaning times, the temperature and time of drying at will.
  4. According to the dirty degree of the viscometers, it can select one or two kinds of washing liquids to drive out the residue completely.
  5. Pipeline uses oil-proof rubber tube to connect, which is oil-proof and corrosion-resistant.
  6. No vapor washing liquid in the washing box and it is safety. The highest temperature is 80°C in the box.

Technical parameters


 Rated voltage

AC220V±10% 50Hz

Total Consumed power

< 300W

Vacuum pumping air rate

 ≥80L/min

Cleaning numbers

Six

Bottles of cleaning fluid capacity

2.5L

Bottles of waste fluid capacity

2.5L

Ambient requirement

Temperature: 20~30°C   Humidity≤85%

28 other products in the same category: