Low Temperature Kinematic Viscosity Tester

Purpose:
PT-D445-265G Low Temperature Kinematic Viscosity Tester is designed and made as per the National Standard GB/T265 “Test Methods for Kinematic Viscosity of Petroleum Products and Calculation of Dynamic Viscosity”. It is suitable to determine kinematic viscosity of liquid petroleum products (Newton liquids) at a certain temperature. It is also in accord with SY/T5651 “Technical Condition for Petroleum Products Kinematic Viscosity Tester”.

Technical Features

1. With advanced compressor technology, the system can bring down the temperature into -70°C while the temperature precision can reach ±0.1°C.
2. There is fluorescent lamp system on the glass window, so the capillary viscometer in the constant bath could be clearly read; it makes the operation more convenient.
3. It can load two samples simultaneously, so the system can do two tests at the same time.
4. Top loading design to make the instrument compact and flexible.
5. Electric stirrer is installed to make the inside temperature even.

Technical parameters
1. Power supply: AC 220V±10%, 50 Hz;
2. Heating device: an electric heater of 600 W;
3. Refrigeration device: by two compressors;
4. Stirring motor: 6 W, 1200 RPM;
5. Temperature range: ambient temperature ~ -70°C;
6. Temperature controlling accuracy: ±0.1°C;
7. Constant temperature bath: 5.8 L with stainless steel inner tank;
8. Operation environment:
(1) Ambient temperature: ≤30°C;
(2) Relative humidity: ≤85%;
9. Temperature sensor: Industrial platinum, Pt100;
10. Illumination: a 6 W/220 V fluorescent lamp;
11. Capillary viscometer: 13 pieces in a group; inner diameter of them are 0.4, 0.6, 0.8, 1.0, 1.2, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 5.0 and 6.0 mm respectively (There is no coefficient for viscometer tubes of 5.0 and 6.0 mm, please calibrate it by yourself).
12. Total power consumption: not more than 1700 W;
13. Dimensions (m): 0.64*0.57*1.07