Digital ceramic water absorption meter

CTI-WAT Series digital ceramic water absorption meter meets the measurement conditions of national standard 3810.3 "Measurement method for water absorption of building sanitary ceramics" and 3299-82 "Measurement method for water absorption of daily ceramics".

Main technical parameters:

1. Vacuum degree: 0.1Mpa±0.005Mpa adjustable (imported digital display control vacuum meter, resolution 0.1KPa, display control accuracy 0.1KPa)

2. Test volume: Ф250×300mm, Ф320×300mm, Ф400×450mm

3. Vacuum holding time: 0~120 minutes continuously adjustable

4. Water filling time: 0~99 minutes 59 seconds continuously adjustable

5. Soaking time: 0~99 hours 59 minutes continuously adjustable

6. Power supply: 220V 180W

Structure and composition of digital ceramic water absorption meter:

CTI-WAT Series digital ceramic water absorption meter adopts mechatronic structure, which consists of vacuum container, water circulation vacuum pump, water inlet solenoid valve, water drain valve, water container and digital controller. The water circulation vacuum pump has the special advantages of low running noise, not easy to damage, low power consumption, etc., which makes the instrument have more superior performance.